Equipment
THE INDUSTRIES WORK HORSE MACHINES
YOUR NEW BEST FRIEND
EVERYONE NEEDS A BEST FRIEND
ROTARY INSERT MOLDING MACHINESBCCL 1, 2 and 3
- Vertical injection and vertical clamp with horizontal rotary table
- Electric driven roller gear indexer - Quick rotation (90 degrees in 1 second, 180 degrees in 2 seconds) provides high throughput
- Barber-Colman Maco controller provides closed loop control for molding accuracy and repeatability
- On board memory for molding recipes, additional recipes can be stored and loaded using cassettes, or optionally, through a PC
- Light curtain for operator safety
- Designed for molding thermoplastics or, optionally, liquid silicone rubber
- One ounce (22MM) or two ounce (30MM) shot capacity
- 25 ton equivalent hydro mechanical clamp.
TTM-BCCL Series
|
Series 1 |
Series 2 |
Series 3 |
| Screen (shOptima AC Operator own) |
 |
|
|
| Statistic Process Control (SPC) Data & Graphics |
|
|
|
| Screw RPM Closed Loop |
|
|
|
| Autotune of heat, molding pressure and speed |
|
|
|
| Shot Size - Magnetostrictive Transducer |
|
|
|
| Standard Specifications |
22MM Screw |
30MM Screw |
| Maximum shot size (PS) |
1 oz. |
2 oz. |
| Screw diameter (inches) |
.8601 |
.174 |
| L/D ratio (length to diameter) |
20:1 |
16:1 |
| Injection stroke (inches) |
4.0 |
4.0 |
| Screwspeed |
275 RPM max. |
275 RPM max. |
| Screw recovery rate (in./sec.) |
.50 |
.50 |
| Screw recovery rate (oz./sec.) |
.125 |
.250 |
| Plasticizing capacity (lbs./hr.) |
22 lbs. |
45 lbs. |
| Barrel heaters (watts) |
2,800 |
2,800 |
| Mold clamping force |
12 Ton* (25 Ton equivalent) |
| Ejector stroke |
.75" max. |
| Hydraulic resevoir capacity |
33 gallons |
| Pump output |
9.5 GPM |
| Normal high pressure |
1,825PSI |
| Normal low pressure |
700 PSI |
| Maximum operating pressure |
2,500 PSI |
| Power requirements |
208-240 3 phase 40 AMPS 60 HZ |
| Motor |
7.5 HP @1,750RPM 3 phase |
| Overall dimentions (inches) |
67" W x 82" L x 93.5"T |
| Shipping weight |
2,900 lbs. |
| Mold base height |
4.00" / 6.00" |
HS2, 2V AND HSTS
- Model TTM-HS2 vertical insert molding machine including:
- 22MM/1-OZ OR 3OMM/2-OZ recprocating screw injection,
- 4, 6 or 12 station, 25"diameter 5/8" stainlesssteel rotary table, or optional 33" diameter table,
- 25ton equivalenthydro mechanical clamp,
- Threezonebarrelheatingwith 5heater bands,
- Microprocessor-based controls,
- Automatic knock-out,
- Heatexchangerforoil cooling.
Variable Programmable Shot Size Two-Stage Injection Option. For Use With Models TTM-HS2 and TTM-HSTS Mold Presses
Featuring
- Programable injection shot size with 2 centigram accuracy.
- Two stage injection with first stage / second stagepressure selection.
- Two stage injection speed with first stage / second stage selection.
- Independent programming of shot size, pressure, speed, and injection cycle at each position ( up to twelve ).
- Adjustable back pressure with programmable setting at each position.
- Stand-by / cancel mode.
- Five memory banks for molding parameter storage and recall.
- Independent molded parts counter for each table position and each memory bank.
- Keyboard index table layout with on / off position selection LED indicators.
- On / off function selection for injection, clamp, and knock-out at each position.
- Storage memory with 64K ROM, 8K RAM, and 8K EEPROM capacity.
- Digital call-up for error and testing / override codes.
- Allows up to twelve different molds to be set up and run at one time.
|
